Industrial Evaporative Cooler

Specification:

Details:

Body is made of 100% new PP material.

It is mechanical strong, cold-resistant and has high softening poit, heat insulation. Besides, it is also resistant to week acid, alkali and solvents, self-extinguishing, non-toxic, odourless, good toughness. It's truly suitable for all over the world.

The motor is in compliance with CCC, CE certification. Low noise, 100% copper-wire motor winding, IP55, F.

Nylon and glass fiber with metal material blades, big air volume, eco-friendly, dynamic balanced tested.

100mm thickness of 5090 type cooling pads, more than 90% evaporative rate. Protection with perfect covered edge.

The water supply system in rational distribution, using water hose, anti-sorrosion, uneasy blocking. Long lifespan.

Using specially designed axial fan with large airflow, low noise, low energy consumption and fine compatibility.

LCD display, easy operation, steady performance, single phase, 380V or 220V.

Cooling principle:

The CY-30TA/DA evaporative air conditioner uses water as the refrigerant, rather than Freon. “Direct evaporation” refrigeration technology brings air into contact with moisture, and the water absorbs the heat during the evaporation process. This process is also described as the constant enthalpy value, as the adsorption of humidity and heat in the air reduces the overall air temperature (also known as dry bulb temperature).

Matters needing Attention

In case of long distance transportation, take protective measures to prevent the products from being damaged on arrival.If in the air cooler packaging plus wood frame protection, is not heavy, collision, should be handled lightly;Check the machine before installation and operation, and add lubricating oil to bearing position;The power supply shall conform to the design specifications, and the voltage deviation shall not exceed the rated voltage of 10V or more;Do not use external force to open the shutter when the air cooler is working.

The installation location of the air cooler affects the air flow and air freshness.

When installed outside, ensure fresh air circulation.The main engine can be installed as far as possible in a place with better ambient air quality.Do not install on odorous vent.

When installing on the wall, on the roof or outdoor floor, should avoid the air duct too long.A general length of 15-20 m is best, with as little or no elbow in the duct as possible.

When the main engine is running, the door or window of a certain area should be opened for ventilation. If there are not enough doors and Windows, an exhaust fan should be installed to ensure that the exhaust volume is 80% of the total air supply by the cooling fan.

The support of the main engine of the air cooler needs to be welded with the steel structure, and its structure is required to support the whole body and twice the weight of maintenance personnel.

http://www.aircoolersupplier.com/