Mirror Polished Stainless Steel Protective Film - Wound Dressing - Medical Supply - Health & Medicine - Products - Yh-Dk.com
TitleProduct

Mirror Polished Stainless Steel Protective Film

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Guangdong

  • Validity to:

    Long-term effective

  • Last update:

    2018-01-25 03:42

  • Browse the number:

    426

Send an inquiries
+
Guangdong Hualibao Industrial Co.,Ltd
Contactaixin:

fshuali(Mr.)  

Email:

telephone:

phone:

Arrea:

Guangdong

Address:

No.10 Fengjian Road, Xingtan Town, Shunde District, Foshan City, Guangdong, China. 528325

Website:

http://www.hualibao-protectivefilm.com/ http://www.yh-dk.com/com/fshuali/

+

Mirror Polished Stainless Steel Protective Film

Low Adhesion Blue Black&White Clear LDPE Protective Plastic Film For Mirror Polished Stainless Steel Sheet

 

Product Details


Main Technical Data


Products Name: Mirror Polished Surface Stainless Steel Protective Film


Scope of application: 304 Stainless Steel, BA,2B,2D,RO,BB,4K,6K,8K,10K,12K panels.


Substrate of the film: Low Density Polyethylene; Linear Low Density Polyethylene


Type of Adhesive: Solvent-based acrylic resin or Water based adhesive


Range of adhesion: Below 60g/25mm for mirror surface


Color: Transparent, Black&White, Blue, White, etc.


Thickness: Maximum 200 microns


Width: Maximum 1560mm


Length: Maximum 2000 meters


Printability: Maximum 3 colors


Tensile Strength: Longitudinally>8N/25mm; Horizontal>15N/25mm


Elongation: Longitudinally>200%; Horizontal>150%


UV Resistance: Available


Directions For Use:


1. Surfaces to be protected should be dry, free from dust, oil, solvents or other chemicals in case of any residue is caused by the chemical reaction with our film adhesive.


2. The best results are obtained with temperature of surface and surroundings at +15°C to 40°C.


3. Use laminating machines with rubber coated press rollers.


4. Try to eliminate or minimize film elongation, and the formation of air bubbles and folds during lamination.


5. Removing the film is advisable to perform in the temperature range 5°C to 40°C (Not below 5°C).


6. The film is not suitable for extreme thermoforming.


http://www.hualibao-protectivefilm.com/