1t Capacity Wood Sawdust Biomass Fuel Rice Husk Pellet Machine

  • Price:


  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:


  • Validity to:

    Long-term effective

  • Last update:

    2017-08-04 05:06

  • Browse the number:


Send an inquiries
Qingdao High-Class Service Import & Export Co., Ltd.

Ms. Elysia(Mr.)  







Room1510, Zhonghai Plaza, No 237 of Wannianquan Road, Licang, Qingdao, Shandong, China 266000




1t Capacity Wood Sawdust Biomass Fuel Rice Husk Pellet Machine
Product Introduction
pellet mill, also known as a pellet press, is a type of mill or machine press used to create pellets from powdered material. Pellet mills are unlike grinding mills, in that they combine small materials into a larger, homogeneous mass, rather than break large materials into smaller pieces.
Pelletizing or making pellets is the process of using organic material such as corn stalks, corn cobs, grass, leaves, bean stubble, switch grass, straw, dry distillers grain (DDG), seed hulls, alfalfa, cardboard, saw dust and paper and putting them through a pellet mill to form pellets. These pellets are then used for burning as fuel in pellet stoves or furnaces or used as animal feed and animal bedding. There are multiple uses for pellets.
1.Biomass pellet machine , also known as rice husk pellet mill, sawdust pellet mill,saw powder pellet mill, which can make rice husk into granular.
2.There are two kinds of biomass pellet machine . One is efficient centrifugal pellet mill, the other is flat die pellet mill. The first one is mainly designed for agriculture waste such as cron stalk, straw, wood and straw dust.

tech data of 1t capacity Wood Sawdust Biomass Fuel centrifugal Pellet Machine
type power(kw) capacity(t/h) outline dimension dead load (t) pellet diameter(mm)
ZLG560 90+1.5+0.37+0.55+2.2 1~1.5 2600×1300×2300 5.3 Φ 4~12
ZLG850 220+3+0.37+0.55+3 2.5~3 3300×1400×3100 14.2  
ZLG1050 315+5.5+0.37+1.1+3 4.5~6 4800×2680×3900 24.5  
ZLG1250 550~660 7~8  4900×2780×4300 48  
Notes: Dual use mold, the pore size of the mold can be same or different,OEM offered.
For the voltage, We can make the mill with different voltage as your request.
Capacity depends on the percentage of concentrated materials and roughage materials.
Advantages of vertical ring die pellet mill
1. Vertical type mold, feeding directly, no material arching, good heating dispersing;
2. Pressing wheel rotation, material goes in a centrifugal way to keep in a even type,
3. Two sets of lubricating system, high axial pressure wheel, ensure the service life, high and sable production capacity.
4. Air cooling and dust removal keeps the long operation, efficient production, energy saving and environmental production;
5. Two layer mold, a dual-purpose machine, more choice, more harvest.

Working principle of vertical ring die pellet mill
The material into the granulating room, the mold rotating and roller rotation itself . so that the material extruded into the mold hole, made into a cylindrical bar, after a knife cutting at the outlet, when pellet formed , they get out of the granulation chamber.
Spare Parts

Wearing parts of 1t capacity Wood Sawdust Biomass Fuel centrifugal Pellet Machine
mold (with pore diameter 4-12mm), roller skin, Roller shaft, Spacer push.
(There are two kinds of material of stainless steel and alloy steel for your choice)
Usage of ZLG Series vertical ring die pellet mill
The ZLG series vertical ring die pellet making machines is widely used in biomass-energy fuels plant, power plant, wood processing plant,fertilizer plant, chemical plant etc. 

The complete pellet making production line as follows:


1) Before raw materials are made into biomass pellets of pellet machine, they are firstly reduced into smaller, uniform- sized particles. When the thickness is larger than 6 mm or size is greater than 50*50 mm, a pellet machine is needed to chip these materials into smaller pieces.


2) After all the raw material of pellet machine are crushed, dryer will be needed since for the most raw materials have the moisture content of about 50%.However, in general the optimal moisture content for pelletiztion is 10%-15%. Therefore, a rotary dryer is included in the pellet machine to reduce the moisture content.


3) After crushing and drying all the raw materials properly, it is ready for the pellet machine. The pellet machine or press is the key piece of machine in the pellet plant. Pellet machine should be mentioned that impurities for the raw materials just like metal or stone, may damage the die and rollers of pellet machine.


4) Usually after pelletizing, the temperature of pellet can reach almost 60-80 degrees, and also the moisture content is close to 15%. For storage purposes, a cooler must be used to reduce the surface temperature and moisture content.


5) Finally is the packing process of pellet making line. Inorder to protect the pellets from getting damaged and to increase storability, proper packing is necessary.


Raw materials 

raw materials such as wheat straw, ice husk, corn straw,sorghum, peanut straw, soybean straw , alfalfa straw and cotton stalk are also widely used in pellets processing.

material size: 2/3 of the required pellet diameter

material moisture: 10~15%

Most of agricultural and forestry waste can be used to make pellets, such as corn straw, sawdust, plant waste, bamboo powder, grass, sunflower stalk, straw, rice
husk, wood chips, dry branches etc.
Big material should be crushed at first, and its size after crushing should be no more than 2/3 diameter of pellets.
Advantages of pellets
1. High burning rate. 
2. Easy to be transported.
3. Regular geometry and small size allow automatic feeding with very fine calibration. They can be fed to a burner by auger feeding or by pneumatic conveying. 
4. Their high density also permits compact storage and rational transport over long distance. They can be conveniently blown from a tanker to a storage bunker or silo on a customer's premises.

The complete pellet line

The complete pellet line mainly consist of a dryer, a hammer mill, a pellet machine,a cooler and a packing machine.

We need to know more of your raw materials before providing professional quotation.The information we need may as follows:

1.what is your raw material?

2. size of your raw material?

3. moisture content of your raw material?

4. the industrial voltage and frequency you required.




We have passed the ISO9001 quality system and CE certification for our machine. Besides, the pellets produced by our machine meet SGS testing standard. Our factory audited by SGS,TVE.


1. MOQ: 1 pcs

2. payment: 30% T/T in advance and the balance by L/C at sight or TT before delivery.

3. delivery time: within 10 working days

4. Pack Info: steel case, wooden box or bubble film wrap into truck or container

5.Shipping info: By sea from Qingdao port, China

 By land from Jinan City, Shandong Province,China
 Packaging Details: Pywood Case, wooden case,iron frame,at customer's option.

4. Delivery Time: 5-20 days against advanced payment.

6.Warranty : 13 months from the very day machine be well installed

7. installation:Machine to be installed and commissioned by HMBT technicians. All the fees can be discussed.

our company

HMBT is a large-scale new energy equipment manufacturers in China. The registered trademark is "Hengmei Better".

Our main products are pellet mill for energy industry, feed-stuff industry and we are dealing with Construction Waste Crushing and Recycling Work station.

1.)years of experience in pellet machine production field.

2.)Approved ISO9001 and international certificate: CE and SGS.

3.)factory audited by SGS.

4.)Over 200 stuff and 220,000sm factory occupation.

5.)Specialized in designing, researching, developing, manufacturing and exporting.

6.)Exported to over 50 countries and finished more than 1,000 turn-key projects.

Q1:What parameters we should offer to get fittest pellet machine?
A1: Raw materials, moisture content in raw materials and machine working capacity.
Q2: Can machine color be customized?
A2: Yeah, no problem.
Q3: Are you a factory or trading house?
A3: We are a factory of approx 120,000MSQ.
Q4: Do you accept on-site inspection to check your pellet machine and your factory?
A4: We strongly, firmly, warmly and sincerely expect your personal visit. And we hope to have a face-to-face negotiation with you and hope to do our host for you then.
Q5: What payment terms do you prefer? A5: We can accept various payment terms if it is convenient for you.
Q6: What about your delivery period?
A6: We will deliver the product in 7-15 days after receiving the deposit. It depends on our production task arrangements, as saying goes: "first come, first served."
Q7: What about your warranty for your machines?
A7: Our machines are warranted for 12 months except the spare parts. we will offer you lifelong consultant services. If required, our engineers can go to your work site to help you solve any problems.
Q8: How could we know about your product before visit your factory?
A8: We can transfer photos and video online to you or we can offer the website on YouTube for your reference.
Q9: Do you need international commission sale agent?
A9: We hope to cooperate with world-wide agents for co-win benefits.
Q10:Give us reasons to purchase your products:
1. our factory is the largest in Shandong Province of China ;
2. our services are humanizing, religious, hospitable and comprehensive;
3. our products are CE approved, and warranted by our entity;
4. Our factory audited by SGS,
5. your personal visit to our factory will prove our words, believe it or not, as long as you visit our factory.


----Providing timely delivery, standby engineers are ready to solve any of your problem in time.

----We provide one years warranty for the steel structure.

----Providing all-embraced warranty of products quality, worksite installation guidance.

----Providing ample spare parts and training of operation and maintenance.

----Engineers have more than 5 years' experience.