Automatic Plastic Stretch Blow Molding Machine for Making Pet Bottle
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Jiangsu
-
Validity to:
Long-term effective
-
Last update:
2017-09-23 02:22
-
Browse the number:
282
+
Zhangjiagang Reliable Machinery Co., Ltd.
- Contactaixin:
Mrs. Lisa(Mr.)
- Email: telephone: phone:
-
Arrea:
Jiangsu
Address:Jiangfeng Road, Yangze Riverside Instruial Zone, Suzhou, Jiangsu, China 215600
- Website:
+
Automatic Plastic Stretch Blow Molding Machine for Making PET Bottle
Description:
Bottle stretch blow molding machine can blow the maximum capacity of the products is 1.5L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:2000BPH(2-cavity),, 4000BPH(4-cavity), 6000BPH(6-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand
Machine Features:
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: less than 0.2 percent.
Automatic Plastic Stretch Blow Molding Machine for Making PET Bottle
RELIABLE Service
The sample service
1.we can send you the video of the running machine.
2.you are always welcome to come to visit our factory, and you may see the operation of the machines here . We will make the arrangement to pick you up when you come .
3.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact information, you can go to visit their factory.
Customized service
1.we can design the machines according your requirements(material ,power,filling type,the kinds of the bottles, and so on).
2.at the same time we will give you our professional suggestion .
After-sales service
1.we will provide the bill of load on time to make sure you can get the machine quickly
2.when you finish the Preparation conditions ,our engineer will go to your factory for the installation, testing and also training .
3.we provide one year warranty with spare parts free.
ZHANGJIAGANG RELIABLE MACHINERY CO.,LTD
Description:
Bottle stretch blow molding machine can blow the maximum capacity of the products is 1.5L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:2000BPH(2-cavity),, 4000BPH(4-cavity), 6000BPH(6-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
Settings:
a).PLC colour display: SIEMENS(GERMANY)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand
Machine Features:
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: less than 0.2 percent.
Technical Parameters RM-6000D Automatic 6-cavity Bottle Blow Molding Machine | |||
MOLDING | Clamping force | kg | 48000 |
Clamping stroke | mm | 125 | |
Stretching stroke | mm | 350 | |
Bottom Stroke | mm | 30-70 | |
Cavity pitch | mm | 120 | |
Number of Cavity | Cavities | 6 | |
CONTAINER | Max. container volume | itr | 1.5 |
Neck diameter range | mm | 18-38 | |
Max. container diameter | mm | 115 | |
Max. container height | mm | 320 | |
Carriage unit | pcs | 166 | |
THEORETICAL OUTPUT | bph | 7200 | |
ELECTRICAL SYSTEM | Total power | kw | 78 |
Heating power | kw | 40 | |
Max. heating power | kw | 72 | |
AIRSYSTEM | Operating pressure | kg/cm2 | 7 |
Air consuming | Itr/min | 1500 | |
Blowing pressure | kg/cm2 | 35 | |
Air consuming | Itr/min | 7400 | |
AIR DRYER | Operating pressure | kg/cm2 | 2-4 |
Temperature | 10-12 | ||
Consuming | kcal/hr | 11400 | |
Flow rate | Itr/min | 90 | |
WATER CHILLER | Operating pressure | kg/cm2 | 2-4 |
Temperature | 30 | ||
Consuming | kcal/hr | 54000 | |
Flow rate | Itr/min | 180 | |
MACHINE | Machine size | mm | 3150-2150-2200 |
Machine weight | kg | 4500 | |
REMARKS | 1. All data standard infication for0.6L bottle. 2. The actual output depends on the preform quality and boltte shape. 3. Specifications are subject to change without notice. 4. Please provide the stable ambient temperature. |
Technical Parameters RM-4000D Automatic 4-cavity Bottle Blow Molding Machine | |||
MOLDING | Clamping force | kg | 32000 |
Clamping stroke | mm | 125 | |
Stretching stroke | mm | 350 | |
Bottom Stroke | mm | 30-70 | |
Cavity pitch | mm | 120 | |
Number of Cavity | Cavities | 4 | |
CONTAINER | Max.container volume | itr | 1.5 |
Neck diameter range | mm | 18-38 | |
Max.container diameter | mm | 115 | |
Max.container height | mm | 320 | |
Carriage unit | pcs | 116 | |
THEORETICAL OUTPUT | bph | 4800 | |
ELECTRICAL SYSTEM | Total power | kw | 54 |
Heating power | kw | 20 | |
Max.heating power | kw | 48 | |
AIRSYSTEM | Operating pressure | kg/cm2 | 7 |
Air consuming | Itr/min | 1500 | |
Blowing pressure | kg/cm2 | 35 | |
Air consuming | Itr/min | 6000 | |
AIR DRYER | Operating pressure | kg/cm2 | 2-4 |
Temperature | 10-12 | ||
Consuming | kcal/hr | 10000 | |
Flow rate | Itr/min | 60 | |
WATER CHILLER | Operating pressure | kg/cm2 | 2-4 |
Temperature | ºC | 30 | |
Consuming | kcal/hr | 45000 | |
Flow rate | Itr/min | 150 | |
MACHINE | Machine size | mm | 2450-2150-2200 |
Machine weight | kg | 3600 | |
REMARKS | 1. All data standard infication for0.6L bottle. 2. The actual output depends on the preform quality and boltte shape. 3. Specifications are subject to change without notice. 4. Please provide the stable ambient temperature. |
Technical Parameters RM-2000HF Automatic 2-cavities Bottle Blow Molding Machine | |||
MOLDING | Clamping force | kg | 1600 |
Clamping stroke | mm | 125 | |
Stretching stroke | mm | 350 | |
Bottom Stroke | mm | 30-70 | |
Cavity pitch | mm | 120 | |
Number of Cavity | Cavities | 2 | |
CONTAINER | Max.container volume | itr | 1.5 |
Neck diameter range | mm | 18-38 | |
Max.container diameter | mm | 115 | |
Max.container height | mm | 320 | |
Carriage unit | pcs | 58 | |
THEORETICAL OUTPUT | bph | 2400 | |
ELECTRICAL SYSTEM | Total power | kw | 30 |
Heating power | kw | 10 | |
Max.heating power | kw | 24 | |
AIRSYSTEM | Operating pressure | kg/cm2 | 7 |
Air consuming | Itr/min | 1000 | |
Blowing pressure | kg/cm2 | 35 | |
Air consuming | Itr/min | 3200 | |
AIR DRYER | Operating pressure | kg/cm2 | 2-4 |
Temperature | 10-12 | ||
Consuming | kcal/hr | 5400 | |
Flow rate | Itr/min | 30 | |
WATER CHILLER | Operating pressure | kg/cm2 | 2-4 |
Temperature | 30 | ||
Consuming | kcal/hr | 39000 | |
Flow rate | Itr/min | 130 | |
MACHINE | Machine size | mm | 1950-1750-2200 |
Machine weight | kg | 2800 | |
REMARKS | 1. All data standard infication for0.6L bottle. 2. The actual output depends on the preform quality and boltte shape. 3. Specifications are subject to change without notice. 4. Please provide the stable ambient temperature. |
RELIABLE Service
The sample service
1.we can send you the video of the running machine.
2.you are always welcome to come to visit our factory, and you may see the operation of the machines here . We will make the arrangement to pick you up when you come .
3.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact information, you can go to visit their factory.
Customized service
1.we can design the machines according your requirements(material ,power,filling type,the kinds of the bottles, and so on).
2.at the same time we will give you our professional suggestion .
After-sales service
1.we will provide the bill of load on time to make sure you can get the machine quickly
2.when you finish the Preparation conditions ,our engineer will go to your factory for the installation, testing and also training .
3.we provide one year warranty with spare parts free.
ZHANGJIAGANG RELIABLE MACHINERY CO.,LTD
other products